Tubular Level Indicator

It is very simple and reliable device for direct reading in atmospheric or pressurized tanks.

Construction & Design Features

  • The indicator is fitted between two end blocks through gland packing's. The indicator is mounted parallel to tank so as to form a close loop causing tank liquid to seek its level in the gauge.
  • Guards are provided in the form of tie rods for 360 visibility or C channel is around the gauge to protect it from accidental blows.
  • Glass removal for replacement is possible.
  • 100% PTFE bush as packing to ensure positive leak tightness for full vacuum as well as 6kg /cm pressure service.
  • It is available in single length of 2000 mm c/c distance. we extended the length by coupling
  • We can also provide the inside build isolation.
  • The connection provided will be Flanged/Screwed/TC joint.
Download PDF
Tubular Level Indicator
diagram (5)

Materials of Construction

Glass tube19mm OD-9
25mm OD-5
Protection guardMS ‘C’ channels-MC
SS 304’C’ channels-SC
MS Tie Rods – MT
SS 304 Tie Rods –ST
End fittingsSS 304 – 4
SS316 – 6
CS – C
PP – P
Other Material – O
Isolation ValveNot provided – W
Needle valve – N
DrainPlug – P
Ball valve – B
Process ConnectionFlanged – F
Screwed – S
ScaleAluminium – A
SS 304 – S
Polycarbonate – P