Single Tank Controller

VSAN offer a liquid level controller to automatically start and stop the pump with tank level input from magnetic float switch or cable float switch. Liquid Level Controller provides LED indication for power on, relay on, tank high or tank low. The controller select a pump mode on PUMP ON or PUMP DOWN.

Pump UP

Technical Specification

  • Input Supply : 230V AC Sensor
  • Input : From Magnetic Float Switch or Cable Float Switch
  • Output : 1NO contact rated fro 230V AC, 5A
  • Mounting : Back panel 35mm din rail mounting
  • Mode : Pump UP ( Filling ) or PUMP Down ( Emptying)

The pump starts at low level and stops at high level, in this mode is used to fill up the tank.

The pump starts at high level and stops at low level, in this mode is used to empty the tank.


Single Tank Controller
diagram (6)


Electronics HousingStainless Steel or die cast aluminium, flame proof
Temperature0 to 65 deg C
ApplicationsLiquids including hazardous but non-corrosive medium
Input Supply12V/24 V DC
Analog output (Programmable)4 – 20mA

20 – 4 mA 3) 0 – 20mA 4) 20 – 0 mA

ModeDistance OR height measurement
LCD Screen8 x 2 alphanumeric displya, green or blue screen
CommuncationRS 485 – Modbus
Measuring range1) 5m 2) 10m
Resolution5mm or 10 mm depending on models
Accuracy0.5% of FSD
Updation time150 mS max
Minimum distance300 mm
Display FilterNone / Low / Medium / High
Temperature compensationInbuilt
Voltage VariationsInternal calibration and automatic compensation
Process connections3 inch flange

Threaded lock nut – Customised

Electrical connectionsPG 9 one gland, 2 numbers
Sensor faceAnodised aluminium
Sensor bodyPVC

Related Products

Please create a layout first. watch this video to learn customize layouts